Welding Beanie Reversible Welder Cap Aztec Cotton Fabric Free Shipping in Canada
Bo-Beanies welding caps, welder beanie, reversible cotton welding hats are made with 100% high quality cotton. All my fabric is pre shrunk in order to give you a comfortable fit. I sew my caps with overlock stitching for durability, allowing them to hold up to the tough conditions you work or play in. These are also great to wear for a comfort layer under your motorcycle helmet as a skull cap too!
My beanies are available in the following head diameter sizes - 21.5", 22”, 22.5”, 23”, 23.5”, 24”, 24.5”, 25" - *Custom size upon request*
Please state your required size in the form upon checkout!
I would be happy to make your beanie a custom size or no bill skull cap if needed, feel free to email message me robyn@bobeanies.com!
Please choose the type of crown you prefer, either low crown or the longer over the ear crown. The low crown option is 6 1/2" long and fits above the ear. The over the ear crown option is 7 1/2" long.
You won't have to worry about looking like you have a "cone head" with my beanie! I have designed them to fit the curvature of your head and they are made with 6 panels and a 3" bill.
The size chart below and guide photos in my listing are there to help you choose the best fit. Each cap is made and cut to order and will create a unique appearance or pattern from the fabric.
If you dry your hat with high heat, you might experience some shrinkage. All caps are made in a smoke free, pet friendly home.
Patterns and colours change frequently and my beanies are created upon the availability of fabrics. Please feel free to ask questions about patterns before you order. If you would like to customize your look and mix up the patterns, I am happy to help if fabric quantity is available!
**There are no refunds or exchanges so please ensure you follow the guides and measure correctly. The size chart is created according to head measurement in inches, if you have any problems, custom size requests, or questions please message prior to ordering.**
Free Canadian Shipping is through Canada Post letter mail and does NOT have tracking. There will be an option to upgrade to tracked shipping upon check out. I am not responsible for lost packages should you choose not to upgrade to tracked shipping.
Size Chart - ** For a snug fit, please choose a diameter that is 1/2" larger than your actual head diameter. For a loose fit, choose a diameter that is 1" or larger than your actual head dimension.
If your head diameter fits in between sizes, it is recommended you size up.**
** Example - Your actual Head Size in Inches is 21.5" choose to order 22" sized cap for a snug fit.
** Example - Your actual Head Size in Inches is 21.5" choose to order 22.5" sized cap for a loose fit.
licensed fabric disclaimer
This item was made using licensed fabric; Bo-Beanies, bobeanies.com and Robyn Kloosterhof is not affiliated with the trademark holder.
Bo-Beanies welding caps, welder beanie, reversible cotton welding hats are made with 100% high quality cotton. All my fabric is pre shrunk in order to give you a comfortable fit. I sew my caps with overlock stitching for durability, allowing them to hold up to the tough conditions you work or play in. These are also great to wear for a comfort layer under your motorcycle helmet as a skull cap too!
My beanies are available in the following head diameter sizes - 21.5", 22”, 22.5”, 23”, 23.5”, 24”, 24.5”, 25" - *Custom size upon request*
Please state your required size in the form upon checkout!
I would be happy to make your beanie a custom size or no bill skull cap if needed, feel free to email message me robyn@bobeanies.com!
Please choose the type of crown you prefer, either low crown or the longer over the ear crown. The low crown option is 6 1/2" long and fits above the ear. The over the ear crown option is 7 1/2" long.
You won't have to worry about looking like you have a "cone head" with my beanie! I have designed them to fit the curvature of your head and they are made with 6 panels and a 3" bill.
The size chart below and guide photos in my listing are there to help you choose the best fit. Each cap is made and cut to order and will create a unique appearance or pattern from the fabric.
If you dry your hat with high heat, you might experience some shrinkage. All caps are made in a smoke free, pet friendly home.
Patterns and colours change frequently and my beanies are created upon the availability of fabrics. Please feel free to ask questions about patterns before you order. If you would like to customize your look and mix up the patterns, I am happy to help if fabric quantity is available!
**There are no refunds or exchanges so please ensure you follow the guides and measure correctly. The size chart is created according to head measurement in inches, if you have any problems, custom size requests, or questions please message prior to ordering.**
Free Canadian Shipping is through Canada Post letter mail and does NOT have tracking. There will be an option to upgrade to tracked shipping upon check out. I am not responsible for lost packages should you choose not to upgrade to tracked shipping.
Size Chart - ** For a snug fit, please choose a diameter that is 1/2" larger than your actual head diameter. For a loose fit, choose a diameter that is 1" or larger than your actual head dimension.
If your head diameter fits in between sizes, it is recommended you size up.**
** Example - Your actual Head Size in Inches is 21.5" choose to order 22" sized cap for a snug fit.
** Example - Your actual Head Size in Inches is 21.5" choose to order 22.5" sized cap for a loose fit.
licensed fabric disclaimer
This item was made using licensed fabric; Bo-Beanies, bobeanies.com and Robyn Kloosterhof is not affiliated with the trademark holder.
Bo-Beanies welding caps, welder beanie, reversible cotton welding hats are made with 100% high quality cotton. All my fabric is pre shrunk in order to give you a comfortable fit. I sew my caps with overlock stitching for durability, allowing them to hold up to the tough conditions you work or play in. These are also great to wear for a comfort layer under your motorcycle helmet as a skull cap too!
My beanies are available in the following head diameter sizes - 21.5", 22”, 22.5”, 23”, 23.5”, 24”, 24.5”, 25" - *Custom size upon request*
Please state your required size in the form upon checkout!
I would be happy to make your beanie a custom size or no bill skull cap if needed, feel free to email message me robyn@bobeanies.com!
Please choose the type of crown you prefer, either low crown or the longer over the ear crown. The low crown option is 6 1/2" long and fits above the ear. The over the ear crown option is 7 1/2" long.
You won't have to worry about looking like you have a "cone head" with my beanie! I have designed them to fit the curvature of your head and they are made with 6 panels and a 3" bill.
The size chart below and guide photos in my listing are there to help you choose the best fit. Each cap is made and cut to order and will create a unique appearance or pattern from the fabric.
If you dry your hat with high heat, you might experience some shrinkage. All caps are made in a smoke free, pet friendly home.
Patterns and colours change frequently and my beanies are created upon the availability of fabrics. Please feel free to ask questions about patterns before you order. If you would like to customize your look and mix up the patterns, I am happy to help if fabric quantity is available!
**There are no refunds or exchanges so please ensure you follow the guides and measure correctly. The size chart is created according to head measurement in inches, if you have any problems, custom size requests, or questions please message prior to ordering.**
Free Canadian Shipping is through Canada Post letter mail and does NOT have tracking. There will be an option to upgrade to tracked shipping upon check out. I am not responsible for lost packages should you choose not to upgrade to tracked shipping.
Size Chart - ** For a snug fit, please choose a diameter that is 1/2" larger than your actual head diameter. For a loose fit, choose a diameter that is 1" or larger than your actual head dimension.
If your head diameter fits in between sizes, it is recommended you size up.**
** Example - Your actual Head Size in Inches is 21.5" choose to order 22" sized cap for a snug fit.
** Example - Your actual Head Size in Inches is 21.5" choose to order 22.5" sized cap for a loose fit.
licensed fabric disclaimer
This item was made using licensed fabric; Bo-Beanies, bobeanies.com and Robyn Kloosterhof is not affiliated with the trademark holder.
